– 7 –
Home Automation Server and Associated Components
Part No.
Product Description
HAS-QN0
Honeywell Home Automation Server (HAS) and Xp Pro operating
system
HAS-QN1
Honeywell Home Automation Server (HAS), Xp Pro operating system.
and HALPro.
HAS-QN2
Honeywell Home Automation Server (HAS), Xp Pro operating system.
HALPro, DDSW1 and EDP100BCEU.
OPTIONS
HALPro
HALPCI Modem and Software License
•
(The HAL Modem in embedded into HAS MAIN SERVER UNIT).
The License is required for HAL for Registration with HAL
Website. Refer to the HALPro User Guide for more details if
you purchased this option.
EDP100BCEU
EDECK with remote and user manual
(Entertainment Media Distribution Module for Individual Rooms in the
House)
•
This module can be purchased separately as per the necessity
of individual home owner. For more information refer to the
Digital Deck User Manual.
DDSW1
Digital Deck user guide and Authorization Sticker (Software License)
RC10PH eDeck
remote
DIGNEO4CRD
4 serial port Digi board
•
This module is needed to connect the Lighting Modules,
Security or HVAC Systems with the Honeywell Home
Automation Server using RS232C Communication.
•
User Reference Guide
•
CD Rom
NOTE:
Both this card and cable DIGNEO4CAB are required and
cannot be used alone.
DIGNEO4CAB
Serial RS-232 DB-9 Octopus cable for Digi board
Connection Details of Honeywell Home Automation Server
The diagram below shows typical connections of the Honeywell Home Automation
Server. Dependent upon the model server you have purchased, certain server
connections and functions may or not be provided. The exact details of the
connections supported by your server can be found on the server and documentation
supplied with it.
NOTE: The figure above shows a typical server configuration and may not reflect
your actual server configuration. You must refer to the documentation supplied
with your server for the actual configuration of your equipment.
