background image

2

WHAT IS

 A

G

ION 

ANTIMICROBIAL

?

AgION* technology prevents surface growth and 
migration of mold, fungus and bacteria in the filter 
for its life - approximately one season.  Keep in 
mind, depending on your water quality, mineral 
deposits can still clog or discolor the filter and 
affect its life and that of the humidifier.

* AgION is registered with the Environmental Protection Agency (EPA)

YOUR HUMIDIFIER

:

SET

-

UP

:

Note

:

We recommend that the humidifier be 

disinfected prior to first use.  Please see 
WEEKLY CLEANING instructions.

• Select a firm, level and flat location.  For proper 

air flow, locate the unit at least six inches (15 
cm) from any wall.  Place the humidifier on a 
water resistant surface, as water can damage 
furniture and some flooring.

• Remove the Natural Cool Moisture

TM

 Filters 

from the Removable Tray before filling the unit.  
Soak the Filters in cool water and then place the 

wet Filters back into the Removable Tray.  

DO

NOT

 squeeze or wring-out the Filters.

Honeywell will not accept responsibility for prop-
erty damage caused by water spillage.

FILLING

:

• Remove the Tank from the Removable Tray.
• Turn the Tank over and unscrew the Cap.
• Fill the Tank with cool water.
• Reinstall the Cap.  Do not overtighten.
• Install the Tank back onto the Removable Tray.

OPERATION

:

Tank

Natural Cool 

Moisture

TM

Filters

Removable 

Water Tray

Motor Housing

• Ensure the humidifier is 

OFF

 prior to plugging it into a 

polarized 120 volt AC outlet.

• Turn the Humidistat Knob to 

HIGH

.

• Set the Output Control Knob to the desired output 

level.

• When the room has reached a comfortable humidity 

level, turn the Humidistat Knob slowly counter-clock-
wise until the fan stops.  The 

DESIRED HUMIDITY

light will be illuminated.

• The humidistat will automatically restart the humidifier 

when the humidity level in the room falls below this 

moisture setting.  This on/off cycle will continue while 

the humidifier is in use.

• Lower the humidity level if condensation forms on 

walls or windows.

Output Control 

Knob

Humidistat Knob

POWER

Summary of Contents for HCM-525 Series






Reviews: