Honeywell
ii
Welcome
Thank you for purchasing our camera!
This user manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series
of product!
Please keep this user manual well for future reference!
Important Safeguards and Warnings
1.
Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage)
and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1.
We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted
repair.
2. Installation
Do not apply power to the camera before completing installation.
Do not put object on the camera.
3. Environment
This series of camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
The working temperature ranges from -10
℃
to +55
℃
. Please keep it away from the
electromagnetic radiation object and environment.
Please keep the sound ventilate.
Do not allow water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further
enhance the reliability of the camera.
4. Daily Maintenance
Summary of Contents for HD-SDC-3300P
