Web Operation | 167
800-18160 - B - 07/2014
Figure 5-33
DDNS Configuration Interface
Operation
Before you can use Honeywell DDNS, you need to enable this service and
configure the proper server address, port value, and domain name.
Note
Do not register frequently. You need to wait at least 60 seconds between
registration requests. Too many registration requests might leave your server
vulnerable to attacks.
Note
The system DDNS server might take back a domain name that is idle for one
year. If you configure your email address in the DDNS configuration, you will get
a notification email before the domain name is
taken back
.
Table 5-15
DDNS Configurations
Parameter
Description
DDNS Type
You can select the DDNS protocol from the drop-down list, and
then enable the
DDNS
function. Select the Honeywell DDNS
server (which is free) to enable the DDNS function.
Server IP
This is the DDNS server IP address. Under
Honeywell DDNS
, the
default server address is
www.hennvr-ddns.com
.
Domain Mode
Select
Default Domain
or
Custom Domain Name
. The default is
Default Domain
. If you select
Custom Domain Name
, then you
must enter a domain name.
Domain Name
The default domain name is
MAC address.hennvr-ddns.com
.
You can define the prefix.
Username
The user name you enter to log in the server (Optional).
Summary of Contents for HEN04101(X)
