52
Redundant times:
output the decode result only when got identical barcodes
information for specific times.
Minimum Length:
output the decode result when the symbology length equal or
larger than the minimum length.
Maximum Length:
output the decode result when the symbology length equal or
shorter than the maximum length.
Transmit Start/Stop Characters:
Start/Stop characters identify the leading and
trailing ends of the bar code. You may either transmit, or not transmit Start/Stop
characters.
Check Character:
No Check Character
indicates that the HF800 reads and
transmits bar code data with or without a check character. When Check Character is
set to
Validate, but Don’t Transmit
, the unit only reads Code 39 bar codes printed
with a check character, but does not transmit the check character with the scanned
data. When Check Character is set to
Validate and Transmit
, the HF800 only reads
Code 39 bar codes printed with a check character, and transmits this character at the
end of the scanned data.
Append Mode:
This function allows the HF800 to append the data from several
Code 39 bar codes together before transmitting them to the host computer. When the
HF800 encounters a Code 39 bar code with the append trigger character(s), it buffers
Code 39 bar codes until it reads a Code 39 bar code that does not have the append
trigger. The data is then transmitted in the order in which the bar codes were read
(FIFO).
Full ASCII Mode:
If Full ASCII Code 39 decoding is enabled, certain character pairs
within the bar code symbol are interpreted as a single character. For example: $V is
decoded as the ASCII character SYN, and /C is decoded as the ASCII character #.
Summary of Contents for HF800 Series
