HH1800 User Guide
147
B - Beeper
Causes a beep to sound after an image is snapped.
0B
No beep
(default)
1B
Sounds a beep when the image is captured
T - Wait for Trigger
Waits for a hardware trigger press before taking the image. This is only available when using
Photo Style (1P).
0T
Takes image immediately
(default)
1T
Waits for a trigger press, then takes the image
L - LED State
Determines if the LEDs should be on or off, and when. Ambient illumination (0L) is preferred
for taking pictures of color documents, such as ID cards, especially when the scanner is in a
stand. LED illumination (1L) is preferred when the scanner is handheld. LED State is not
available when using Decoding Style (0P).
0L
LEDs off
(default)
1L
LEDs on
E - Exposure
Exposure is used in Manual Style only (2P), and allows you to set the exposure time. This is
similar to setting a shutter speed on a camera. The exposure time determines how long the
scanner takes to record an image. On a bright day, exposure times can be very short because
plenty of light is available to help record an image. At nighttime, exposure time can increase
dramatically due to the near absence of light. Units are 127 microseconds.
(Default = 7874)
n
E
Range: 1 - 7874
