HH1800 User Guide
51
Multiple Symbols
When this programming selection is turned
On
, it allows you to read multiple symbols with a
single pull of the
scanner’s trigg
er. If you press and hold the trigger, aiming the scanner at a
series of symbols, it reads unique symbols once, beeping and or vibrating (if turned on) for
each read. The scanner attempts to find and decode new symbols as long as the trigger is
pulled. The maximum number of barcodes read is 21. When this programming selection is
turned
Off
, the scanner will only read the symbol closest to the aiming beam.
Default = Off.
On
* Off
No Read
With No Read turned
On
, the scanner notifies you if a code cannot be read. If using an
EZConfig-Scanning Tool Scan Data Window (see page
), an “NR” appea
rs when a code
cannot be read. If No Read is turned
Off
, the “NR” wil
l not appear.
Default = Off.
On
* Off
If you want a different notation than “NR,” for example, “
Error
,” or “Bad Code,” you can edit
the output message with
NRDSTR menu command, such as: NRDSTR
Error
or
NRDSTR
Bad Code
Video Reverse
Video Reverse is used to allow the scanner to read barcodes that are inverted. The
Video
Reverse Off
barcode below is an example of this type of barcode. Scan
Video Reverse Only
to
read
only
inverted barcodes. Scan
Video Reverse and Standard Barcodes
to read both types
of codes.
Note:
After scanning
Video Reverse Only
, menu barcodes cannot be read. You must scan
Video
Reverse Off
or
Video Reverse and Standard Barcodes
in order to read menu barcodes.
