66
HH1800 User Guide
Insert a string
BA
Sen
d “ss” str
ing
of “nn” length in the output message, leaving the
cursor in the current
position.
Syntax = BAnnnns...s
where nnnn stands for the length of the string, and s...s stands
for the string. The string is made up of hex values for the characters in the string. Refer to the
ASCII Conversion Chart (Code Page 1252),
beginning on page 203 for decimal, hex and
character codes.
B9 and
BA Example: Look for the string “AB” and insert 2 asterisks (**)
Using the barcode above, send all characters up to but not i
ncluding “AB.” I
nsert 2 asterisks at
that point, and send the rest of the data with a carriage return after.
Command string:
B900024142BA00022A2AF10D
B9 is the “Send all characters up to a string” comman
d
0002 is the length of the string (2 characters)
41 is the hex value for A
42 is the hex value for B
BA is the “Insert a string” co
mmand
0002 is the length of the string to be added (2 characters)
2A is the hex value for an asterisk (*)
2A is the hex value for an asterisk (*)
F1 is the “Send all characters”
command
0D is the hex value for a CR
The data is output as:
1234567890**ABCDEFGHIJ
<CR>
