HH1800 User Guide
97
blood product label. Use the barcodes below to turn concatenation on or off.
Default =Off.
On
* Off
Code 128 Redundancy
If you are encountering errors when reading Code 128 barcodes, you may want to adjust the
redundancy count. Redundancy adjusts the number of times a barcode is decoded before
transmission, which may reduce the number of errors. Note that the higher the redundancy
count, the longer it will take to decode the barcode. To adjust the redundancy, scan the Code
128 Redundancy barcode below, then scan a redundancy count between 0 and 10 on the
beginning on page 211. Then scan the
Save
barcode.
Default = 0.
Code 128 Redundancy
Code 128 Message Length
Scan the barcodes below to change the message length. Refer to
(page 82) for additional information. Minimum and Maximum lengths = 0-80. Minimum
Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length