60
HH1800 User Guide
If you have changed data format settings, and wish to clear all formats and return to the
factory defaults, scan the
Default Data Format
code below.
* Default Data Format
Show Data Format
Scan the barcode below to show current data format settings.
Data Format Settings
Add a Data Format
Step 1. Scan the
Enter Data Format
symbol (
Step 2. Select
Primary/Alternate Format
Determine if this will be your primary data format, or one of 3 alternate formats.
This allows you to save a total of 4 different data formats. To program your primary
format, scan
0
from the
beginning on page 211. If you are
programming an alternate format, scan
1, 2
, or
3
, depending on which alternate
format you are programming. (See
Primary/Alternate Data Formats
further information.)
Step 3.
Terminal Type
(page 62) and locate the Terminal ID number for your PC.
Scan three numeric barcodes from the
to program the scanner for your terminal ID (you must enter 3 digits). For example,
scan
0 0 3
for an AT wedge.
Note:
099
indicates all terminal types.
Step 4.
Code I.D.
In the
beginning on page 200, find the symbology to which you
want to apply the data format. Locate the Hex value for that symbology and scan
the 2 digit hex value from the
If you wish to create a data format for all symbologies, with the exception of some
specific symbologies, refer to B8 (
).
If you are creating a data format for Batch Mode Quantity, use
35
for the Code I.D.
