98
HH490 User Guide
Code 128 Append
This function allows the scanner to append the data from several Code 128
barcodes together before transmitting them to the host computer. When the
scanner encounters a Code 128 barcode with the append trigger character(s), it
buffers Code 128 barcodes until it reads a Code 128 barcode that does not have
the append trigger. The data is then transmitted in the order in which the
barcodes were read (FIFO).
Default
=
On.
*On
Off
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
on page 208), and scan the value and the Save
beginning on page 211. The data
characters should then appear properly.
Code 128 Code Page
GS1-128
<Default All GS1-128 Settings>
