HH490 User Guide
7
USB HID
Scan the following code to program the scanner for USB HID Barcode scanners.
USB HID Barcode Scanner
USB Serial
If you are using a Microsoft® Windows® PC, you will need to download the latest
driver from the Honeywell website
and go to Get
Resources - Downloads - Software. The driver will use the next available COM
Port number. Apple® Macintosh computers recognize the scanner as a USB CDC
class device and automatically use a class driver.
After the driver is downloaded, scan the following code to program the scanner to
emulate a regular RS232-based COM Port.
USB Serial
No extra configuration (e.g., baud rate) is necessary.
Note:
If you scan the USB Serial barcode either with an older Honeywell serial driver, or
no driver installed, you may no longer be able to scan barcodes. If this happens,
either uninstall the older driver versions and install the latest driver or delete the
specific device entry in Device Manager.
CTS/RTS Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off