HH490 User Guide
57
1 2 3 4
5
Intercharacter Delay
An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each character of scanned data. Scan the
Intercharacter Delay barcode below, then scan the number of 5ms delays from
the
beginning on page 211, then Save.
Intercharacter Delay
To remove this delay, scan the Intercharacter Delay barcode, then set the
number of delays to 0. Scan the Save barcode from the
beginning on page 211.
Note:
Intercharacter delays are not supported in USB serial emulation.
User Specified Intercharacter Delay
An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed after the transmission of a particular character of scanned data. Scan the
Delay Length barcode below, then scan the number of 5ms delays from the
beginning on page 211, then Save.
Next, scan the Character to Trigger Delay barcode, then the 2-digit hex value for
a printable character to trigger the delay (see
205.
)
Delay Length
Character to Trigger Delay
To remove this delay, scan the Delay Length barcode, and set the number of
delays to 0. Scan the Save barcode from the
page 211.
Intercharacter Delay
Prefix
Scanned Data
Suffix
