Honeywell HHF360 Series, Manual

•   Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) 

away from any wall or any combustible material. 

DO NOT

 use on an unstable surface such as 

bedding or deep carpeting.  

BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY  

CHILDREN OR PETS.

SET-UP

•  Turn off the heater.

•  Allow it to cool for ten minutes.

•  Unplug heater and move. Heaters are equipped with a Cool Touch Handle for your convenience.

MOVING THE HEATER

OPERATION

•   NOTE: The 360° Surround Heat

®

 Heater requires no assembly.

•  NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED

•  The 360° Surround Heat

®

 Heater is designed to disperse heat in a 360° range.

Model HHF360 Series – Manual Surround Heat

®

 Heater Operation

•  With the Power Knob in the OFF (

o

) position, plug the heater into a polarized 120V outlet.   

DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

•  The Power Knob is equipped with two (2) settings, Low and 

High. The Low setting uses 750 watts of power and the High 

setting uses 1500 watts of power. You can select the proper 

setting to accommodate your comfort level with the Power 

Knob. When you choose any setting the red Power Light will 

come on. Because the Low setting does not require as much 

electricity to operate, it is more energy efficient and may be a 

better option if you are concerned about the amperage draw 

on a circuit when the heater is on the High setting.

•  Turn the Thermostat Control fully clockwise to the highest 

setting.

•  When the room reaches a comfortable temperature, slowly turn the Thermostat Control  

counter-clockwise until the heating element goes off (the red Power Light will not be shut off).  

This is the point at which the Thermostat setting equals the room temperature. At this setting, 

the Thermostat will automatically turn the heater on and off to maintain the selected temperature.

•  Turn the Power Knob to OFF (

o

) and unplug the heater when you are finished using it.

10.

CAUTION 

 – THIS APPLIANCE HAS A 

POLARIZED PLUG (ONE BLADE IS WIDER 

THAN THE OTHER). TO REDUCE THE RISK 

OF SHOCK, THIS PLUG IS INTENDED TO 

FIT ONLY ONE WAY IN A POLARIZED 

OUTLET. IF THE PLUG DOES NOT FIT 

SECURELY IN THE OUTLET, REVERSE 

THE PLUG. IF IT STILL DOES NOT FIT, 

CONTACT A QUALIFIED ELECTRICIAN. DO 

NOT ATTEMPT TO DEFEAT THIS SAFETY 

FEATURE.

11.

Warning

 – It is normal for the plug to feel 

warm to the touch; however, a loose fit 

between the AC outlet (receptacle) and plug 

may cause overheating and distortion of 

the plug.  contact a qualified electrician to 

replace loose or worn outlet.

12.

Warning

 – To disconnect the heater, first 

turn off the product, then grip the plug body 

and pull it from the wall outlet. Never pull by 

the cord.

13.

Warning

 – Do not insert or allow foreign 

objects to enter any ventilation or exhaust 

opening as this may cause an electric shock 

or fire, or damage the heater.

14.

Warning

 – To prevent a possible fire, do not 

block air intakes or exhaust in any manner. 

Do not use on soft surfaces, like a bed, or 

where openings may become blocked.

15.

Warning

 – A heater has hot and arcing or 

sparking parts inside. Do not use it in areas 

where gasoline, paint or flammable liquids 

are used or stored.

16.

Warning

 – Use this heater only as  

described in this manual. Any other  

use not recommended by the  

manufacturer may cause fire,  

electric shock, or injury to persons.

17.

Warning

 – Always plug heater directly into 

a wall outlet/receptacle. Never use with an 

extension cord or relocatable power tap 

(outlet/power strip). 

18.

Warning

 – Never tamper with this product 

or attempt to fix it. Any tampering with, or 

modification of this product can result in 

serious injury, death, or fire. Risk of electric 

shock. Do not open. No user serviceable 

parts inside. 

19.

Warning

 – Do not remove product labels 

that contain warnings or safety instruction.

20.

Caution

 – The output of this heater may 

vary and its temperature may become 

intense enough to burn exposed skin. Use 

of this heater is not recommended for 

persons with reduced sensitivity to heat or 

an inability to react to avoid burns.

21. Caution

 – Before cleaning, or storage, or 

when not in use, turn the product’s controls  

to the OFF position and unplug the heater 

from the electrical outlet and allow to cool.

22. Caution

 – Place the heater on a firm, level, 

open surface free from obstructions and 

at least 3 feet (0.9 m) away from any 

combustible materials. DO NOT use on an 

unstable surface such as bedding or deep 

carpeting. Be sure the heater is not in a 

position where it may be tripped over by 

small children or pets. The heater’s rubber 

feet will hold it firmly in position.

23. Caution

 – If your home has aluminum 

wiring have a licensed electrician check 

your receptacle’s connections. When 

using a 1500 watt heater, aluminum wire 

connections can cause a safety issue.

24. 

SAVE THESE

 INSTRUCTIONS

Heat Setting

Thermostat Control

Power  

Light