Description
HON 670 / HON 671 Controllers Component Documentation
8
Illegible information on the device poses a risk of injury due to resulting erroneous opera-
tion, use, or installation.
Labels, as well as inscriptions and stamping on the device, can eventually become soiled or
otherwise unrecognizable to such an extent that users will not be warned effectively of
hazards and may be unable to follow required operating instructions. This will pose a risk of
injury.
Make sure to always keep all relevant labels in good condition so that they will be easily
legible.
Immediately replace damaged and missing labels.
Make sure you have the right component documentation for your device.
To identify your device, look at the nameplate.
Make sure that the conditions on site correlate with the information on the type plate and
the technical specifications.
Technical specifications
The monitoring device type plate locations are as follows:
Figure
No.
Description
1
Type plate on the side of the monitoring
device
2
Additional type plate on the side of the
monitoring device
The details on the type plate have the following meaning:
Figure
No.
Description
1
Manufacturer ID
2
Manufacturer’s address
3
Type designation
4
Serial number
5
PS = Maximum allowable pressure
Identifying the device
Verifying the technical
specifications
Locating the monitoring
device’s type plates
Interpreting the type
plate on the monitoring
device
