2
HPB407 Installation Instructions
P/N 52382:A 06/30/2004
Figure 1 HPB407
!
WARNING:
• To reduce risk of electric shock, do not expose unit to rain or excessive moisture, and disconnect
power before servicing unit.
For continuous protection against hazard, replace fuses only with exact type and rating.
• A readily accessible switched circuit breaker must be available to disconnect mains power as required.
• All 120 V wiring should be routed so that it cannot touch 24 V wiring; minimum spacing 3/8" (0.953 cm).
• Installation & servicing should only be made by qualified personnel
• Install in accordance with all local regulations and the National Electrical Code
NOTE: For additional information
• Visit our website: http://www.honeywellpower.com
• Contact Technical Support: (800) 627-3473
• Email us: not_techserv@fla-whq.com
H
PB4
07
is
o.e
p
s, HP
B40
7
.eps
