background image

1

2. Brief description

HR92 is an electronic radiator controller with a modern 
design. Because of the wireless communication with 
a frequency of 868 MHz the controller can be easily 
integrated in heating systems such as evohome to 
control the room temperature.

User-friendly

• 

Large adjustable display with backlight. 

• 

Display of information in the display using symbols 
and text.

• 

Parameters can be set individually.

• 

Manual temperature modification (effective until the 
next switching point) possible at any time.

Mounting

• 

The radiator controller fits on the most common 
radiator valves of the type M30x1.5.

• 

Further adapters are available as accessories.

• 

An external window contact can be connected 
optionally.

Energy saving features

• 

With the window function, the radiator valve is closed 
when ventilating the room.

• 

If an external window contact is used, the radiator 
valve is c
losed when a window is open.

CAUTION

 

f

Use the radiator controller only in 
accordance with these operating 
instructions.

 

f

Do not let children play with the radiator 
controller.

1. Scope of delivery

The radiator controller packaging contains:

3

1

2

4

Radiator controller with valve baseplate M30 x 1.5; 
batteries included

Display support

Valve adapter type Danfoss RA

Screws for securing radiator controller and battery 
compartment

WARNING

Danger of suffocation!

 

f

Keep packaging materials away from 
children.

Wireless

Radiator Controller

HR92

UK

Summary of Contents for HR92














Reviews: