Setup
______________________________________________________________________________________________
42
Sensor
MOTION/EVENT CONFIGUR ATION
SENSOR
INPUT
SENSOR
ACTION
ALARM MONITOR
SAVE
CANCEL
NO.
1
SIGNAL
ON
SET CLEAR
NO.
1
2
3
4
TYPE
N/O
N/O
N/O
N/O
Sensor Setup
1.
Use the arrow buttons to select Sensor 1 and press ENTER to change
to N/O (Normally Open) or N/C (Normally Closed).
2.
Repeat for all sensors.
3.
Select SAVE and press ENTER to save settings and exit Sensor Setup.
Relay Setup
1.
Use the arrow buttons to select Relay 1 and press ENTER to turn OFF
or ON.
2.
Repeat for all relays.
3.
Select SAVE and press ENTER to save settings exit Sensor Setup.
