60 | Performance Series HREP2 DVR User Guide
www.honeywell.com/security
4.
When done, press
EXIT
on the remote control or click
CLOSE
at the bottom of the screen.
The confirmation message appears and you will return to the previous menu.
CAUTION
The motion detection sensitivity may differ depending
on the characteristics of the connected camera or the installation
environment.
Setting the Motion Area
From the motion setup window, click
EDIT AREA
in the right corner to display the area setup
screen. Setting the motion area may differ depending on the camera model. Below is a typical
setting of the motion area.
1.
Click
EDIT AREA
to open the motion area setup screen (see
).
Figure 4-6
Setting a Motion Detection Area
2.
If you are using the remote control, press
ENTER
to mark the current position.
3.
Use the arrow buttons to move to a desired block and press
ENTER
. The area setup will
begin.
Then, use the arrow buttons to specify the area.
Note
Alternatively, you can use the drag-and-drop method to specify or release the
area as using mouse.
4.
If you select the specified area again, it will be released from the selected motion area.
5.
Press
EXIT
on the remote control or right-click any area to display the popup menu as
shown in
6.
While the popup menu is displayed, select
Sensitivity
to set the motion detection
sensitivity of the channel currently selected (see
Summary of Contents for HREP216
