Configuration
Document 800-00919
Rev F
35
02/08
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately
60 seconds to initialize.
Initial Unit Setup
Before using your DVR for the first time, you need to establish the initial settings. This
includes items such as:
•
time and date (see
Setting up the Date and Time
on page
41
)
•
display language (see
Changing the Language Setting
on page
39
)
•
camera (see
Configuring Input Devices
on page
50
)
•
audio (see
Setting the DVR to Record Audio
on page
59
)
•
remote control (see
Communicating with External Devices Using the RS-232C Port
on page
60
)
•
record mode (see
Configuring Recording Settings
on page
61
)
•
network (see
Setting Up the DVR Network Connections
on page
82
)
•
password (see
Changing Network Passwords
on page
83
and
Changing the
Administrator Password
on page
95
)
Your can set up these items using various screens and dialog boxes.
1.
Press the
Menu
button on the front panel or remote control to enter the setup
screens. The Admin Password screen appears.
Figure 3-3
Admin Password Screen
2.
Enter the password by pressing the appropriate combination of camera number
buttons and then
. The factory default password is
4321
. There are two Setup
screens: Quick Setup and Normal Setup. The factory default is the Quick Setup
screen.
Summary of Contents for HRSD4
