Honeywell
38
Figure 4-31 Function Menu
Note
•
Preset, tour and pattern all need the value to be the control
parameter. You can define it as you require.
•
You need to refer to your speed dome user’s manual for
auxiliary function definition. In some cases, it can be used for
special process.
•
The following setups are usually performed in the interfaces
shown in
Figure 4-29
,
Figure 4-30
and
Figure 4-31
.
Preset Setup
In
Figure 4-29
, use eight direction arrows to adjust camera to the proper position.
In
Figure 4-30
, click
Preset
and input the preset number. Clicking
Set
will save the
preset.
Now you can add this preset to one tour.
Figure 4-32 Preset Setup
Activate Preset
In
Figure 4-31
, input the preset number in the “No.” field, and click
Preset
.
