Honeywell
89
Figure 6-36 The NAS Setup Menu
Please refer to the following sheet for detailed information.
Parameter Function
NAS enable
Please select network storage protocol and then enable NAS
function.
Server IP
Input remote storage server IP address.
Port
Input Remote storage server-port number.
User Name
Log in user account.
File length
The file length you upload to the FTP.
When setup is larger than the actual file length, system will upload
the whole file. When setup here is smaller than the actual file
length, the system only uploads the set length and auto ignore the
left section. When interval value is 0, system uploads all
corresponding files.
Password
The password you need to log in the server.
Remote Path
Remote storage file path.
Save
You can click
Save
after you complete setup for one channel, or
you can complete the whole setups and then click save button.
Refresh
Click this button to get device latest configuration information.
NTP
The NTP interface is shown in
Figure 6-37
.
Here you can realize network time synchronization. Please enable current function
and then input server IP, port number, time zone and update interval.
