Screw
11
Connecting the water outlet bend with the water purifier:
1. Align the water outlet bend with the hope on the top cover and push it in to the end.
Change of battery:
1. Shut the tap’s inlet switch and remove the upper cover from the machine;
2. Use a cross screwdriver to remove the screw on the face of the battery box;
3. Remove the battery box cover and the No. 7 batteries (2 units) inside, and replace
them with new batteries;
4. Re-install the battery box’s cover and tighten the screw. Finally install the upper cover
on the machine.
