upper cover
Draining of residual water:
6
Turn off the tap before changing the cartridge.
1. Incline the water purifier in a position of about 45 degrees to drain any residual water
in the water outlet. See the illustration below:
2. Hold the upper cover and turn it anti-clockwise in order to remove it from the machine.
3. Grip the cartridge and remove it before placing the new cartridge in its place. Press
the new cartridge. If the new cartridge is not properly aligned, rotate it lightly to align it
with the stopper in the machine.
Grip the cartridge
When assembling the cartridge,
rotate it lightly to align it with the
stopper.
4. Screw the upper cover onto the machine and ensure that there is no gap.
5. Flush the water purifier for about 10 minutes until the water discharged is clear with
no air bubbles. The water purifier is now ready to provide drinking water.
