System Operation and Configuration
68
Export Configuration File
To export the configuration (except for the IP address setting) file to an external USB device,
click
Export
in the above window and the below window is displayed:
Figure 5-75 Export
Select the target USB device and file and then click
OK
to start exporting the configuration
file (Config_export.hdc) and wait until it shows that the exporting is complete.
Import Configuration File
To import a configuration file, copy the configuration file (“.hdc” file) into a USB storage
device and connect it to the NVR. Click
Import
as shown in
Figure 5-74
and the below
window is displayed:
Figure 5-76 Import
Select the target file and then click
OK
to start importing the configuration file. When finished,
the system will restart automatically to apply the new configuration.
