OPERATION
•
With the power
switch in the
OFF
posi-
tion, plug the filled
humidifier into a polar-
ized 120V outlet.
• DO NOT FORCE THE
POLARIZED PLUG INTO
THE OUTLET; it will
only fit one way.
CAUTION: DO NOT
ATTEMPT TO PLUG THE
HUMIDIFIER IN WITH
WET HANDS AS AN
ELECTRIC SHOCK
COULD OCCUR.
•
Turn the Humidity
Level Knob (Humidstat)
to the
HIGH (+)
position.
NOTE: If the humidifier
will not run, the humidi-
stat may be set too low.
Moving the Humidity
Level Knob to a higher
setting (clockwise)
should restart the unit.
•
Set the Moisture
Output control to the
desired position:
-HIGH
for fast humidifying
-LOW
for quieter
operation.
•
Press the
RESTART
button located on the
front of the unit. This will
start the humidifier.
•
Allow 2 to 5 minutes
for the base to fill with
water and for the
humidifier to begin pro-
ducing moisture.
•
When a comfortable
humidity level is
reached, lower the
Humidity Level setting
slowly until the heating
element shuts off. The
Desired Humidity light
will illuminate, indicat-
ing that the desired
humidity has been
reached.
•
The Humidistat will
automatically restart
the heating element
each time the humidity
level falls below the
desired setting. This
ON/OFF cycle will con-
tinue while the humidifier
is in use.
NOTE:
The power light
will illuminate until the
power switch is in the OFF
position.
•
If condensation
begins to form on the
walls or windows, lower
the Humidistat setting.
•
When you are fin-
ished using the humidi-
fier, turn the Power
Switch to OFF.
•
ALWAYS be sure to
discard any water in the
base each time you refill
the Water Tank or finish
using the humidifier.
