5
RESETTING YOUR HUMIDIFIER
When your humidifier is out of water, the Reset Light will illuminate. To reset:
1. Turn power OFF
2. Pour up to 1.5 gallons of water into the Fill Area
3. Wait 5 minutes and turn power ON
NOTE:
If Reset Light is still on, the Heating Element may need to
be cleaned. (
see Cleaning Instructions
section)
USING YOUR HUMIDIFIER
HWM440 Manual Control
1. Power:
With power switch in off position (centered), plug the filled humidifier
into a polarized 120V outlet
CAUTION: To avoid electric shock, DO NOT plug in humidifier with
wet hands.
2. Output:
Press Power Switch to the left for low output
or to the right for
high output
.
High setting will bring the water to a boil faster.
Note:
The green light will indicate the humidifier is working, but it will take
up
to one minute for visible steam to appear.
3. Reset:
When the humidifier is out of water, the Reset Light will illuminate.
See
Resetting Your Humidifier
in previous section.
HWM445 Humidistat Control
Plug the filled humidifier into a polarized 120V outlet.
CAUTION: To avoid electric shock, DO NOT plug in humidifier with
wet hands.
1. Power:
Press the Power icon to turn on. The unit will default to high
output, high humidity setting.
Note:
It will take
up to one minute for visible steam to appear.
2. Output:
Press the Moisture Output icon
to toggle between high and low
moisture output.
High setting will bring the water to a boil faster.
3. Humidistat:
Press the Humidity Control icons to adjust the humidistat. It is
recommended to run the humidifier on a higher setting until a comfortable
humidity level is reached.
•
Adjust the Humidity Control icon down, allowing 2 seconds between settings, until the Humidity Reached
light
illuminates and the humidifier turns off. This is your desired humidity level. The humidifier will
turn on and off to maintain this setting.
4. Reset:
When the humidifier is out of water, the Reset Light
will illuminate. See
Resetting Your Humidifier
in
previous section.
WARNING: DO NOT OPERATE WITH TOP COVER, MIST CHIMNEY, HEATING ELEMENT COVER OR
WATER LEVEL FLOAT REMOVED.
2
3
1
4
3
1
3a
2
