When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electrical shock and injury to
persons, including the following:
IMPORTANT INSTRUCTIONS
1.
Read all instructions before using heater.
2.
This heater is hot when in use. To avoid burns, do not let bare skin touch
hot surface. If provided, use handles when moving this heater. Keep com-
bustible materials such as furniture, pillows, bedding, papers, clothes and
curtains at least 3 feet (0.9m) from the front of the heater and keep them
away from the sides and rear.
3.
Extreme caution is necessary when any heater is used by or near children or
invalids and whenever the heater is left operating and unattended.
4.
Always unplug the heater when not in use.
5.
Do not operate the heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Return heater
to authorized service facility for examination, electrical or mechanical
adjustment, or repair.
6.
Do not use outdoors.
7.
This heater is not intended for use in bathroom, laundry areas and similar
moist indoor locations. Never locate heater where it may fall into a bathtub
or other water container.
8.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners or the like. Arrange cord away from traffic areas where it will
not be tripped over.
9.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of shock, this plug is intended to fit only one way in a polar-
ized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT
attempt to defeat this
safety feature.
10.
This heater draws 12.5 amps during operation. To prevent overloading a cir-
cuit, do not plug the heater into a circuit that already has other appliances
working.
11.
It is normal for the plug to feel warm to the touch; however, a loose fit between
the AC outlet (receptacle) and plug may cause overheating and distortion of
the plug. Contact a qualified electrician to replace loose or worn outlet.
12.
To disconnect the heater, first turn controls to the
OFF
position, then grip the
plug and pull it from the wall outlet. Never pull by the cord.
13.
Do not insert or allow foreign objects to enter any ventilation or exhaust
1
READ ALL SAFETY INSTRUCTIONS BEFORE USING THIS HEATER
IMPORTANT SAFEGUARDS
