4
•MODE: SET TIMER
BACK-LIT DISPLAY
TROUBLESHOOTING
If your heater shuts off unexpectedly, safety fea-
tures may have been activated to prevent over-
heating. If this happens:
• Be sure the heater is plugged in and that the
electrical outlet is working.
• Check your temperature setting. The heater
may simply be off because you have reached
your desired heat setting.
• This heater has a caution light located above
the control panel. DO NOT operate the heater
while the caution light is on.
•
Check for any obstructions. If you find an
obstruction, turn the heater OFF and unplug it.
Allow the heater to cool completely, then
remove the obstruction. Wait at least 10 min-
utes, then replug in the heater, press Power
and follow the OPERATION INSTRUCTIONS.
•
For more troubleshooting tips, visit our website at:
www.honeywellconsumerproducts.com
NOTE: IF YOU CONTINUE TO EXPERIENCE A
PROBLEM, PLEASE RETURN THE HEATER
TO THE PLACE OF ORIGINAL PURCHASE OR
SEE YOUR WARRANTY. DO NOT ATTEMPT
TO OPEN THE HEATER YOURSELF. DOING
SO MAY VOID YOUR WARRANTY AND
CAUSE DAMAGE TO THE HEATER OR PER-
SONAL INJURY. IF YOU HAVE ANY QUES-
TIONS REGARDING THIS HEATER, PLEASE
CALL OR WRITE:
Honeywell
Consumer Relations Department
250 Turnpike Road
Southborough, MA 01772
Toll Free 1-800-332-1110
E-mail: honeywell@protocolusa.com
CLEANING
AND
STORAGE
:
We recommend that the heater be cleaned at
least once a month and before off-season stor-
age.
•
Turn the heater OFF and unplug it. Allow it to
cool completely.
•
Use only a dry cloth to clean the external sur-
faces of the heater. DO NOT USE WATER,
WAX, POLISH, OR ANY CHEMICAL SOLU-
TION.
•
Clean your heater using the above-mentioned
steps, then pack the heater in its original con-
tainer and store it in a cool, dry place.
•
This heater does not disassemble.
ACCESSORIES
:
Your heater is compatible with both a Basic or
LCD Remote Control. To upgrade your heater or
to get a listing of available accessories, visit our
website at:
www.honeywellconsumerproducts.com
• Press Mode until the Timer icon blinks. The Hour
display will appear.
• Use the Up or Down arrows to set an operation time
between 1 and 10 hours.
• The heater will turn-off when time runs out.
Basic Remote
LCD Remote
Adjust Up or
Down
Mode
Timer
• The Back-lit feature provides light to the heater dis-
play and functions in any power or mode setting.
• Press the Back-lit button to toggle this feature on
and off.
Basic Remote
LCD Remote
Back-lit
