4.2
Einbauhinweise
4.3
Projektierung einer Blockschlosstür
Damit der Blockschlossriegel während der Montage ein - und ausgefahren werden kann, wird die
braune Ader an +12 V und die weiße Ader an Masse angeschlossen.
Die grüne und die gelbe Ader bleiben unbeschaltet. So wird das Schließen des Blockschlossriegels
ohne Anschluss an die Auswerteeinheit ermöglicht. Die Anpassung des Schließbleches an den
Blockschlossriegel, z. B. durch einen Schreiner oder Schlosser, ist dadurch problemlos möglich.
Jetzt kann das Blockschloss über einen Profilhalbzylinder problemlos auf - und zugeschlossen
werden.
IK-Auswerteeinheit
mit Summer
Türzarge
Türblatt
Schloss
Kabelvorrat
IK-Blockschloss mit
Dornmaßverlängerung
Kabelübergang
Kabel vom
Blockschloss
zur Auswerteeinheit
konventionelle Anschlusstechnik
oder BUS-2 Technologie
Magnetkontakt
Riegelschaltkontakt
(RSK zur Verschluss-
überwachung)
zur Zentrale
6
Montage-Anschluss-Anleitung IK2-Blockschloss