background image

CV41 Vehicle Mount Computer (Windows CE) User Guide

33

7. Turn on the CV41. A screen prompt appears.

8. Press 

and then 

Enter

 to update the OS and device firmware. The installer installs 

the update onto the CV41. When it is finished, the CV41 turns off.

9. Remove the USB flash drive and press the 

Power

 button. The CV41 continues the 

update process. After the update is complete, the computer boots again.

Update the Honeywell Content Software

You can use these methods to update the Honeywell Content software on the CV41:

You can update individual computers, or multiple computers at the same time using 
the SmartSystems console. For help, see the next section, 

Update Honeywell Content 

Using SmartSystems Foundation

.

You can update individual computers using ActiveSync.

Update Honeywell Content Using SmartSystems Foundation

You can use the SmartSystems console to update the Honeywell Content on your CV41. 
The console is part of SmartSystems Foundation and is available from the Honeywell 
website. Before you can update your CV41, you need:

SmartSystems Foundation. To find the application, go to the Technical Support 
Downloads Portal at w

ww.hsmftp.honeywell.com

.

.the SSPB files you want to install. These SSPB files are available from the Technical 
Support Downloads Portal at w

ww.hsmftp.honeywell.com

.

After you locate these items, you can update your CV41 using SmartSystems Founda-
tion.

1. Open the SmartSystems console.

2. Make sure the computer is discovered.

3. Make sure the computer is in the powered smart dock and that power management 

is disabled.

4. Download the SmartSystems bundle to your PC.

5. Double-click the SmartSystems bundle on your PC to extract the update files to the 

software vault.

6. From the SmartSystems console, locate the bundle to install and drag it to each 

computer (or group in a folder) you want to update. The SmartSystems console 
installs the update to your computers.

Note:

The SmartSystems console indicates that your computer is offline by displaying a red stop 
symbol until the computer reboots and connects to the system.

Update Honeywell Content Using a ActiveSync

Use ActiveSync to update individual computers.

Summary of Contents for Intermec CV41























































































































Reviews: