CV41 Vehicle Mount Computer (Windows CE) User Guide
51
Choose Between Microsoft and Funk Security
The computer supports both Funk and Microsoft security, which dynamically select
wireless networks based on your preferences. The option you choose depends on your
network security needs.
•
If you are using the computer in a static environment that requires a high level of
security, you should use Funk security, which offers CCX v4.0 compliance, support for
LEAP and TTLS, and configuration for up to four profiles.
To use Funk security, you need to select a profile. For help, see the next section,
•
If you are primarily using the computer to connect to Wi-Fi hotspots, you may want
to use Microsoft security.
To use Microsoft security, you need to select it as your security choice. For help, see
Select Microsoft as Your Security Choice
Select a Funk Security Profile
You can define up to four profiles for Funk security. Different profiles let your computer
communicate in different networks without having to change all of your security set-
tings. For example, you may want to set up one profile for the manufacturing floor and
one for the warehouse. By default, the active profile is Profile 1.
Select a Funk Security Profile
Use the following procedure to select a Funk security profile.
1. Start Intermec Settings.
2. Choose
Communications
>
802.11 Radio
>
Funk Security
.
3. Choose a profile. A list of configurable settings appears.
4. (Optional) In the
Profile Label
text box, enter a meaningful name for your profile.
5. Configure your security settings. For help, see the next sections.
6. Repeat Steps 3 through 5 for each profile you want to define.
7. Set an active profile by choosing it from the
Active Profile
list.
8. Save your settings.
Configure WPA or WPA2 Enterprise (802.1x) Security With Funk
Use these procedures to set WPA-802.1x or WPA2-802.1x security on your computer
with Funk security.
1. Make sure the communications and radio parameters on your computer are config-
ured.
2. Make sure Funk is selected as your security choice.
3. Start Intermec Settings.
4. Choose
Communications
>
802.11 Radio
>
Funk Security
.
Summary of Contents for Intermec CV41
