Chapter 1 — About the Printers
PD43 and PD43c Commercial Printer User Manual
23
The printer command language is saved to memory, and remains set to
ESim/ZSim until you change this setting.
How to Set the Printer Command Language
You can use one of these methods to change the printer command
language:
•
Printer web page
•
Main Menu
•
PrintSet 5. For more information, see the PrintSet 5 online help.
Set the Command Language from the Printer Web
Page
To set the command language from the printer web page, you need to
turn on the printer and connect to your Ethernet or Wi-Fi network.
1
Make sure that the printer has media and ribbon (if necessary)
installed.
2
On your PC, open a browser.
3
In the
Location
or
Address
bar, type the printer IP address and
press
Enter
. The printer web page appears.
4
Click
Login
. The Login page appears.
5
Type your
Username
and
Password
and click
Login
. The default
username is
itadmin
and the default password is
pass
.
6
Click the
Configure
tab.
7
Click
System Settings > General
.
8
Select a different printer command language from the
Command
Language
list, and then click
Save
.
9
Click the
Services
tab.
10
Click
Reboot Printer
, and then click
Reboot
. The printer restarts
in the command language you selected.
Summary of Contents for Intermec PD43
