32
Revision 2 Nov/2002
KMD 550/850 FIS Addendum
FIS TEXT PAGE OPERATIONAL CONTROLS
MODE - Toggles between METAR/SPECIs, PIREPs
and TAFs.
Joystick - Moving the joystick right or left
moves the cursor through the available
reports.
CHANGE AREA - Pressing the CHANGE
AREA softkey will cycle through the four
options available for the AREA field in the
upper right of the display. Available selections
are DESTINATION, NEAREST, FLPN WPT and USER DEFINED. The
closest available weather reports for the selected AREA will be displayed
in the AVAILABLE REPORTS field.
METAR MAP - This softkey is only available
when viewing text METARs and graphical
METARs are available. When the METAR
MAP softkey is pressed, the Graphical METARs Page will be displayed
with the map centered on the location of the selected METAR report.
SCAN/DATA - The SCAN feature is only
available when FLPN WPT is the selected
AREA. The DATA feature is available when
USER DEFINED is selected. When the
Control Knob function is set to SCAN, the
inner knob cycles through the available flight
plan waypoints. When the Control Knob function is set to DATA, the
outer knob moves the cursor to the desired character in the desired field.
The inner knob allows the selection of the desired letter or number in
each field.
Normal Operation
KMD 550/850 FIS PG R2 11/21/02 5:34 PM Page 32