PW7K1ICE System Configuration via Web Interface
Web Server Configuration
PW7K1ICE Installation and Configuration Guide
, Document 800-26497
43
3.3.3 Host Communication Screen
1. Click the
Host Comm
link on the navigation bar to display the
Host
Communication Settings
screen where you can configure the communication
port information:
Figure 3-11: Host Communication Screen
2. From the
Communication Address
drop-down list, select one of the eight (0
to 7) available communication addresses for the PW7K1ICE board.
3. For the
Primary Host Port
, make the following selections:
a.
Connection Type
. Select
IP Server
.
b.
Data Security
. Select one of the following values from the drop-down
list:
None
,
Password/AES
.
c.
Port Number
. Enter the port number through which the host computer
can communicate with the PW7K1ICE board.
d. Select either
Allow All
or the
Authorized IP Address Required
option
button.
–
Allow All
, as the label suggests, allows all IP addresses to
communicate with the PW7K1ICE.
– If you select the
Authorized IP Address Required
option, also
enter in the
Authorized IP Addresses
fields all the IP addresses
that would be allowed to communicate with the PW7K1ICE.
