37
a.
Event Zone Type starts the Smart Scene in response to any event (Fault, Trouble
or Alarm) in any protected Zone of a specific zone type. Select the desired option.
Typical zone types include:
•
Entry/Exit (front and back doors)
•
Perimeter (typically window sensors)
•
Interior Follower (typically motion sensors)
•
Day/Night (Usually assigned to sensitive areas where immediate notification of
an entry is always wanted.)
•
24 Hour Silent (Emergency (Panic) button)
•
24 Hour Audible (Emergency (Panic) button)
•
Silent Burglary (typically a sensor)
•
Fire No Verification (smoke detector)
•
Fire With Verification (smoke detector)
•
Carbon Monoxide (CO detector)
NOTE: Your system may include Zones that do not offer every Zone Type response.
b.
Restore Zone Type starts the Smart Scene when any zone with the selected Zone
Type returns to its normal state (such as a door closing). The options are the same
as Event Zone Type options.
NOTE: Event Zone Type and Restore Zone Type are separate settings. For
example, a given Smart Scene can be triggered by a Fire Alarm (Fire No
Verification as the Event Zone Type) OR by an open door closing (Entry/Exit as the
Restore Zone Type).
c.
Trigger starts the Smart Scene in response to a Fault, Trouble or Alarm in a
particular zone or changes to connected devices.
A note about triggering events:
Any change in the state of a security system zone is known as a Fault. Faults can
include Trouble and Alarm conditions. Trouble can include low battery or loss of
communication with the device. Alarm conditions include zone faults while the
system is armed and fire/CO detectors. Fault, Trouble and Alarm conditions can be
used to trigger a Smart Scene.
Fault:
Any change in the state of a sensor triggers the Scene.
Trouble: Only Trouble conditions trigger the Scene
Alarm:
Only Alarm conditions trigger the Scene.
Choosing one of these events sets the button at right to display Zone options.
Smart Scenes can also be triggered by changes in connected devices such as lights
and locks. These events include:
Light On
Light Off
Door Locked
Door Unlocked
Choosing one of these events sets the button at right to display Device options.
d.
Choose Zone or Device, depending on your selection of a Trigger above. Security
zone sensors or devices such as lights and locks are listed.
e.
Select the zone or device and Save.
f.
System Operation starts Smart Scenes in response to security-related events. Options
include:
•
Arm Away
•
Arm Home
•
Disarm
•
Any Burglary Alarm
•
Bell Timeout (end of the programmed time for which an alarm sounds)
•
Start of Entry Delay
•
End of Exit Delay
•
Any Fire Alarm
Summary of Contents for Lyric LCP300-L
