42
User Settings
User Name
Newly-created users are given a default name. To customize a user’s name:
1.
Press Name at upper left on the display. A keyboard appears.
2.
Press Clear to delete the default name.
3.
Enter the desired name, using as many as 10 characters.
4.
Save. User details appear.
5.
Press Save again. The list of users appears, displaying your changes.
User Code
Newly-created users have no security code. To assign a code:
1.
Press User Code. A keypad appears.
2.
Press Clear if you are changing an existing code.
3.
Enter a four-digit code.
4.
Press Done. User details appear.
5.
Save. The list of users appears.
Users and Z-Wave Lock Control
NOTE:
This option appears only if Z-Wave devices are connected.
Each user can be given the ability to disarm the system by entering their code to open a Z-
Wave lock.
When creating or editing a User:
1.
Set Z-Wave Lock Control to Yes. Z-Wave Unlocking Door appears.
2.
Select Disarm.
3.
Press Save.
With this setting, entering a user code at any Z-Wave door lock in the system unlocks the
door and disarms the security system.
Summary of Contents for Lyric LCP300-L
