Rev. B
6-70
HMXMC001013
31-Mar-06
VCR Management
Late Rewind Management
VCRs, which are being reviewed during tape
change operations, will be bypassed automatically,
i.e. they will not be rewound/ejected. This check
box enables late rewind management functionality
so at the end of review it automatically initiates a
rewind/eject sequence on the VCR. The operator
who was previously reviewing the VCR will receive
an on-screen message as to the status of the late
rewind operation.
If this check box is disabled, VCRs that were
bypassed during tape change operations will
return to the record mode when the review
operation terminates.
GENERAL
SETTINGS,
CONT.
VCR Alarm Group
VCR management provides enhanced alarm
handling capabilities for dedicated, standby and
logging VCRs. An alarm will only be generated
when a VCR ceases to record for reasons outside
of system control, i.e. an alarm will occur due to a
tape jam, but not if the VCR is stopped for review
or tape change. When an alarm does occur, the
alarm group is definable through this field allowing
VCR alarms to be directed to specific monitors.
