Rev. B
6-25
HMXMC001013
31-Mar-06
CCTV Keyboards
Audible Status
Selecting the Audible Status field allows for configuration of audible keyboard
prompts. Click on the box to the left of the selection to toggle its status. A
check mark in the box to the left of the prompt indicates the option is
selected.
Key Click – the keyboard beeps in response to every key press.
Joystick Click – the keyboard beeps in response to any joystick movement.
Warning Prompt - the keyboard buzzes in response to warning messages
(eg. trying to pan / tilt a fixed camera).
Alarm Prompt – The keyboard will beep continuously in response to an alarm
message, until the alarm is cleared.
Deadman Tone
–
keyboard will beep if keyboard is not used for specific
amount of time as defined by keyboard operator section.
To deselect all audible keyboard prompts, click on the Deselect All button,
then click on OK.
When done selecting audible prompts, click on the OK button.
To exit the field without changing the current settings, click on the Cancel
button.
Post Event Macro
This field defines the macro sequence that will be executed following
keyboard activity of the type specified in the Post Event Flags.
