C O N F I G U R I N G M A X P R O N V R
Configuring the Sequences
176
MAXPRO NVR 5.0 Installation and Configuration Guide
6
Deleting a Schedule
You can delete a schedule for the camera when you do not want to record video at recurring
intervals.
1.
Click the
Configurator
tab. The
System
page displays by default.
2.
Click the
Schedule
tab to navigate to the
Schedule
page.
3.
Under
Schedules
, select the schedule you want to delete from the list. The schedule’s
details appear.
4.
Click
Delete
, and then click
Yes
in response to the confirmation message.
C o n f i g u r i n g t h e S e q u e n c e s
A sequence is a set of live video streamed one after the other from cameras for a specified
time interval. You can select the cameras or presets to be included in a sequence and also
specify the time interval for which the video from each camera or preset must be displayed.
Presets must be defined for the cameras before including them in the sequence.
Creating a Sequence
You can create a sequence to display video that is captured from different cameras connected
to MAXPRO NVR. You can add a maximum of 50 sequences in MAXPRO NVR.
To create a sequence
1.
Click the
Configurator
tab. The
System
page displays by default.
2.
Click the
Sequence
tab to navigate to the
Sequence
page.
Figure 6-46 Sequence page
3.
Click
Add
.
Summary of Contents for MAXPRO NVR Hybrid PE
