l
Channel Setup
l
Exit
To make a selection, scroll until the circle to the left of your choice is black, and then press
[MODE].
Note: If you do not make a selection in 60 seconds, it automatically exits to the main
Programming Menu.
Ping Net
Pinging tests the radio connection between the Mesh Router and other units on its network. (A
“ping” is a short signal sent to the network to prompt a reply; it contains no other data.)
Scroll until “Ping Net” is selected.
Press [MODE] to ping the network. This message appears:
Press [Y/+]. The Mesh Router broadcasts a ping signal to its network. All devices in the network
that receive the ping signal respond with a beep if they are within the range. You can also ping
from an instrument in the network. If it is within range, the Mesh Router responds with a beep
and an LED light flash.
Mesh Router
41
User Manual
Summary of Contents for Mesh Router
