MU1H-1555GE23 R0815
GB
.
Installation
7
Fig. 6: Install filter connection
[1] Connection thread
[2] washer
[3] Isolation valve
• Fit the isolation valve using the compression fittings
and rings provided. Ensure correct assembly and do
not make watertight yet.
Fig. 7: Check flow direction
[1] Diverter body
• Check flow arrow direction on diverter body and
ensure it is the same as the pipe work flow direction.
• Fit diverter body using flat washers provided.
• Tighten water tight using spanner.
• Position the diverter valve including the isolation
valve correctly.
• Make the compression connections water tight.
