ML7295 SPRING RETURN DIRECT COUPLED ACTUATORS
63-2539—1
3
Fig. 1. Approximate dimensions of the ML7295 Spring Return
Direct Coupled Actuator and mounting bracket in in. (mm).
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service
technician.
4. After the installation is complete, check out the product
operation as provided in these instructions.
WARNING
Installing the actuator near explosive vapors
could result in serious injury or death.
A spark from the actuator or attached accessories
could ignite escaping gas or explosive vapors.
Install actuator in areas free of escaping gas and
other explosive vapors.
CAUTION
Failure to disconnect power before installation can
result in electrical shock or equipment damage.
Disconnect all power supplies before installation.
Motors with auxiliary switches may have more than
one disconnect to de-energize the device.
1-11/32
(34)
5/32 (4)
1/4 (7)
MIN.
1-11/32
(34)
1-1/8
(28)
7-3/4
(197)
11-13/16
(300)
4
(100)
MIN.
25/32
(20)
17/32
(14)
1-23/32 (30)
11/32 (10)
9
(230)
M12444A
3/4
(20)
MAX.
3-15/16 (100)
2-1/2
(63) MIN.
95
°
3-3/8 (85)
OPENING FOR 3/8 INCH
FLEX CONDUIT (2 PLACES)
