2
B
AR
C
ODE
C
ONFIGURATION
M
ETHODS
Please note that the MS6220 Pulsar can only be configured
using the
Multi-Code
Method.
To properly configure an MS9540 scanner, all programming
codes must be scanned using the CodeGate
option.
Multi-Code Method
All features can be enabled or disabled using the
Multi-Code
Method
.
A feature marked with a tilde ( ~ ) requires the
Multi-Code
Method
.
1. Power up the scanner.
2. Scan
the
enter/exit configuration mode
bar code (3 beeps).
3. Scan the bar code for the desired feature (1 beep).
Multiple features can be enabled/disabled before
scanning the
enter/exit configuration mode
bar code.
4. Scan
the
enter/exit configuration mode
bar code (3 beeps) and
save the new configuration.
To abort a configuration change, power off the scanner before
scanning the enter/exit code.
Enter/Exit Configuration Mode
³
9
9
9
9
9
9
N
EED
T
O
S
TART
O
VER
?
Scan the
Recall Default
bar code. This will erase all previous settings and return
the scanner to its default communication protocol.
Keyboard Wedge interface scanners will load keyboard wedge defaults.
All other scanners load RS232 defaults.
Metrologic manufactures custom OEM scanners, which load the OEM’s
defaults. Page 89 will explain how this affects “Metrologic Defaults.”
Recall Defaults
³
9
9
9
9
9
8
Summary of Contents for MS9544
