manualshive.com logo in svg

Honeywell MX3PLUS, Reference Manual

The Honeywell MX3PLUS is a cutting-edge device designed to enhance your user experience. Unlock the full potential of your MX3PLUS with the comprehensive User Manual, available for free download from 88.208.23.73:8080. This manual provides step-by-step instructions and invaluable insights, allowing you to maximize the utility of your Honeywell MX3PLUS device.

Share
Download
background image

Chapter 9: Technical Assistance

If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below:

Knowledge Base:

www.hsmknowledgebase.com

Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base cannot help, our Technical Support
Portal (see below) provides an easy way to report your problem or ask your question.

Technical Support Portal:

www.hsmsupportportal.com

The Technical Support Portal not only allows you to report your problem, but it also provides immediate solutions to your
technical issues by searching our Knowledge Base. With the Portal, you can submit and track your questions online and send
and receive attachments.

Web form:

www.hsmcontactsupport.com

You can contact our technical support team directly by filling out our online support form. Enter your contact details and the
description of the question/problem.

Telephone:

www.honeywellaidc.com/locations

For our latest contact information, please check our website at the link above.

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service centers throughout the world. To obtain
warranty or non-warranty service, please visit

www.honeywellaidc.com

 and select

Support > Contact Service and Repair

to see your region’s instructions on how to obtain a Return Material Authorization number (RMA #). You should do this prior to
returning the product.

Limited Warranty

Honeywell International Inc. ("HII") warrants its products to be free from defects in materials and workmanship and to conform
to HII’s published specifications applicable to the products purchased at the time of shipment. This warranty does not cover
any HII product which is (i) improperly installed or used; (ii) damaged by accident or negligence, including failure to follow the
proper maintenance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the
purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface connections, (C) static
electricity or electro-static discharge, (D) operation under conditions beyond the specified operating parameters, or (E) repair or
service of the product by anyone other than HII or its authorized representatives.

This warranty shall extend from the time of shipment for the duration published by HII for the product at the time of purchase
("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to HII factory
or authorized service center for inspection. No product will be accepted by HII without a Return Materials Authorization, which
may be obtained by contacting HII. In the event that the product is returned to HII or its authorized service center within the
Warranty Period and HII determines to its satisfaction that the product is defective due to defects in materials or workmanship,
HII, at its sole option, will either repair or replace the product without charge, except for return shipping to HII.

EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS IN LIEU OF
ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT.

HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS. IN NO EVENT

9-1

Summary of Contents for MX3PLUS



















































































































































































































































































































Reviews:

No comments

Related manuals for MX3PLUS

Wasp WDT2200 User Reference Manual preview
WDT2200
Brand: Wasp Pages: 20
Tennant Orbio OS 3 Operator'S Manual preview
Orbio OS 3
Brand: Tennant Pages: 98
MUNBYN IPDA035 Quick Manual preview
IPDA035
Brand: MUNBYN Pages: 14
AMobile PD450 User Manual preview
PD450
Brand: AMobile Pages: 7
Bartec MC 75Axex-NI User Manual preview
MC 75Axex-NI
Brand: Bartec Pages: 72
Unitech PA690 Quick Reference Manual preview
PA690
Brand: Unitech Pages: 10
Abbott i-STAT 1 Quick Reference Manual preview
i-STAT 1
Brand: Abbott Pages: 7
Mio Digi Walker P350 User Manual preview
Digi Walker P350
Brand: Mio Pages: 100

Brands by name

Popular brands

Load more brands