Honeywell MX7 Tecton Reference Manual Download

Page: 182 / 366

How to Remap a Key Sequence

1. Select the modifier key from the Modifier Mode options.

2. Select the key to be remapped from the Key pulldown list.

3. Select

Key Sequence

from the Remapped Key pulldown list.

4. Select the first key for the multiple key sequence from the pulldown list.

5. Press the

Add

button to add the key to the multiple key sequence shown in the Key Sequence box. Repeat this step

until all keys desired have been added to the key sequence. If necessary, use the

Clear

button to erase all entries in the

Key Sequence box.

6. Click

to save the result and close the Keypad Control.

Note:

A key can only be used once in a multiple key sequence. For example, an F1 key added to a key sequence means an

F1 key cannot be used again in the same key sequence.

Remap a Key to a Sequence of Unicode Values

Up to 16 Unicode values may be specified for the key sequence. The sequence can consist of keys and Unicode values.

1. Select the modifier key from the Modifier Mode options.

2. Select the key to be remapped from the Key pulldown list.

3. Select

Key Sequence

from the Remapped Key pulldown list.

4. Select

Unicode

from the Key Sequence pulldown list.

5. There are two Unicode text boxes located on the lower part of this tab. Enter the Unicode value in the left textbox and

the Unicode character is displayed in the right textbox.

6. Press the

Add

button to add the key to the multiple key sequence shown in the Key Sequence box.

7. Repeat steps 4 through 6 until all desired characters have been added to the key sequence. If necessary, use the

Clear

button to erase all entries in the Key Sequence box.

8. Click

to save the result and close the control panel.

4-144

Summary of Contents for MX7 Tecton















































































































































































































































































































































































Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands

Honeywell MX7 Tecton, Reference Manual

Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands