Honeywell MX7 Tecton Reference Manual Download

Page: 296 / 366

How to: Use Sign On Screen

1. After completing the other entries in the profile, click on the

Credentials

button. Leave the Username and Password

blank. No entries are necessary on the Credentials screen for LEAP or LEAP/WPA.

2. For PEAP-MSCHAP and PEAP-GTC, importing the CA certificate into the Windows certificate store is optional.

3. For EAP-TLS, import the CA certificate into the Windows certificate store. Also import the User Certificate into the

Windows certificate store.

4. Access the Credentials screen again. Make sure the

Validate serve

r and

Use MS store

checkboxes are checked.

5. The default is to use the entire certificate store for the CA certificate. Alternatively, use the Browse button next to the

CA Cert (CA Certificate Filename) on the Credentials screen to select an individual certificate.

6. For EAP-TLS, also enter the User Cert (User Certificate filename) on the credentials screen by using the

Browse

button.

7. Click the

button then the

Commit

button.

8. When the device attempts to connect to the network, a sign-on screen is displayed.

9. Enter the Username and Password. Click the

button.

10. Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the

Status Tab

indicates the device is Authenticated and the method used.

11. The sign-on screen is displayed after a reboot.

Note:

See

Configuring the Profile

for more details.

If a user enters invalid credentials and clicks

, the device associates but does not authenticate. The user is again prompted

to enter credentials.

If the user clicks the

Cancel

button, the device does not associate. The user is not prompted again for credentials until:

the device is rebooted,

the radio is disabled then enabled,

the

Reconnect

button on the

Diags Tab

is clicked or

the profile is modified and the

Commit

button is clicked.

8-20

Summary of Contents for MX7 Tecton















































































































































































































































































































































































Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands

Honeywell MX7 Tecton, Reference Manual

Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands