N05010/N10010
NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR
MODULATING AND FLOATING / 2-POSITION CONTROL
PRODUCT DATA
GENERAL
This non-spring return direct-coupled damper actuator
provides modulating and floating/2-position control for:
•
air
dampers,
•
VAV
units,
•
air
handlers,
•
ventilation
flaps,
•
louvers,
and
•
reliable control for air damper applications with up to 1 m
2
/ (5 Nm) and 2 m
2
(10 Nm) (seal-less damper blades; air
friction-dependent).
FEATURES
•
Declutch for manual adjustment
•
Adjustable mechanical end limits
•
Removable access cover for direct wiring
•
Mountable in any orientation
•
Function selection switch for selecting modulating or
floating/2-position control
SPECIFICATIONS
Supply voltage
24 Vac/dc -15%/+20%, 50/60 Hz
Nominal voltage
24 Vac/dc, 50/60 Hz
All values stated hereinafter apply to operation under
nominal voltage conditions.
Power consumption
N05010
5 VA / 2 W
N10010
5 VA / 2 W
Control signal
Modulating 0...10
V
Floating/2-Position 24
Vac/dc
Ambient limits
Ambient operating limits
-20...+60
°
C (-5...+140 °F)
Ambient storage limits
-30...+80
°
C (-22...+176 °F)
Relative humidity
5...95%, non-condensing
Safety
Protection standard
IP54
Protection class
II as per EN 60730-1
Overvoltage category
II
Lifetime
Full strokes
60000
Repositions 1.5
million
Mounting
Round damper shaft
8...16 mm
Square damper shaft
6...13 mm; 45° steps
Shaft length
min. 41 mm
End switches (when included)
Rating
5 A (resistive), 3 A (inductive)
Triggering points
5° / 85°
Torque rating
5 Nm / 10 Nm
Runtime for 90°
mod. (dc / 50/60 Hz ac)
90 sec
floating (dc / 60 Hz ac)
90 sec
floating (50 Hz ac)
110 sec
Rotation stroke
95
°
±
3
°
Dimensions
Weight (without cables)
450
g
Noise rating
35 dB(A) max. at 1 m
® U.S. Registered Trademark
EN0B-0478GE51 R0105
Copyright © 2005 Honeywell Inc. • All rights reserved
