AM-1224
Installation and programming manual
PAGINA -
15
AM-1224_manu
Doc. M-124.1-AM1224-ENG Rev A.1
NOTIFIER ITALIA
Stand-by condition
The following screen is visualized when the control panel is in stand-by condition.
Zone Fault
Counter
System Faults
Counter
Zone excluded
Counter
Function associated to the key
F1
.
In this case the pressure of the Key
F1
allow the
entry in the programming menù.
See paragraph description of the operation of
the keyboard for data entry.
See programming menù
Function associated to the key
F2
.
In this case the pressure of the Key
F2
allow the entry in the Utility
menù. See paragraph description of
the operation of the keyboard for
data entry.
See utility menù.
Function associated to the key
F3
. In this case
the pressure of the Key
F3
allow the entry in the
Exclusion menù. See paragraph description of
the operation of the keyboard for data entry.
See exclusion menù.
Function associated to the key
F4
. In this
case the pressure of the Key
F4
allow the
entry in the Test menù. See paragraph
description of the operation of the keyboard
for data entry.
See test menù.
Date - Hour
Icon for the indication of the control panel status. Without alarm and troubles the NOTIFIER logo is visualized.
With
Disabled
points/zone
an
exclamation marks
report them(
!
).
With
Alarms
the symbol of a
Flame
is visualized
and the backlit of display become red
.
With
Troubles
the symbol of a
Triangle
is visualized .
Note: The alarm status override any other indication .
