68
RP-2002 Series Manual —
P/N 53039:E6 1/26/2017
Programming
Master Programming Level
Time-Date
The control panel time and date can be changed by pressing
1
while viewing the System Setup
Screen #2. The following screen will be displayed:
Time
To change the time, press
1
while viewing the Time-Date Screen. The following screen will be
displayed:
A flashing cursor is located toward the top left of the display. Below the cursor is the current time.
To change the time, enter the two-digit hours followed by the two-digit minutes. The cursor will
move one position to the right each time a digit is entered. After the last minutes digit is entered, the
cursor will again move one position to the right. At this point enter
1
for AM or
2
for PM. The
display will then return to the Time-Date Screen which will show the new time entry. If an error is
made while entering a digit, press the
CLR
key to delete the entire entry and begin again.
Date
To change the date, press
2
while viewing the Time-Date Screen. The following screen will be
displayed:
A flashing cursor is located toward the top left of the display. Below the cursor is the current date.
To change the date, enter the two-digit month followed by the two-digit day and then the two-digit
year (14 for 2014, 15 for 2015, etc.). The cursor will move one position to the right each time a
digit is entered. After the last year digit is entered, the display will return to the Time-Date Screen
which will show the new date entry. If an error is made while entering a digit, press the
CLR
key to
delete the entire entry and beginning again.
Clock Format
The clock can be configured to display 12 hour (AM & PM) or 24 hour (military) time. Pressing
3
while viewing the Time-Date screen will cause the display to toggle between 12HR and 24HR.
Select 12HR for 12 hour display or 24HR for 24 hour display.
SYSTEM SETUP
1=TIME-DATE
2=TROUBLE REMIND
3=CHARGR DISABLE
System Setup Screen #2
TIME AND DATE
1=TIME 10:00A
2=DATE 09222014
3=CLOCK FORMAT 12HR
Time-Date Screen #1
TIME AND DATE
1=DAYLIGHT SAVINGS
Time-Date Screen #2
ENTER TIME AS 12HRS
:
1=AM 2=PM
Time Screen
ENTER DATE
✱✱
-
✱✱
-
✱✱✱✱
MONTH DAY YEAR
09-22-2014
Date Screen
NOTE:
If the clock is changed to 24 hour (military) format, the date will change to the European
standard of
Day-Month-Year
(for display purposes only).
Summary of Contents for NOTIFIER RP-2002C
Page 158: ...Cut along dotted line ...
